AUS Injection TB-24030 Remanufactured Fuel Injector

AUS Injection TB-24030 Remanufactured Fuel Injector Review

AUS Injection TB-24030 Remanufactured Fuel Injector Feature

• Remanufactured In the USA
• All units are 100% factory tested before packaging
• Clean injectors provide better gas milage and increase overall performance
• All injectors are lubricated prior to packaging ensuring a trouble free installation
• All injectors are backed by a 12 month 12,000 mile warranty

Quality remanufactured fuel injectors that are electronically tested for correct electrical resistance and for coil weakness. Good units are then disassembled (micro filter, seals, pintle caps and plastic spacer are removed.) Injectors are simultaneously cleaned in ultrasonic tanks specially designed to clean fuel injectors. All units are individually back flushed to remove the broken dirt particles, these particles can not be removed thru the injection orifices therefore are driven out thru the inlet of the injector. All injectors are then mounted on the flow bench in an inverted position to allow them to reverse flow at a considerable pressure. We run a high performance injector cleaning solvent thru the injectors for 30 minutes, completing the cleaning process. This process assures all dirt particles are completely removed from the injector. Injectors are now mounted on the flow bench in the correct position to begin the testing procedures. We apply 60 PIS of pressure (more than a regular multi-port fuel injection system) and maintain the injectors with no signal to them for 30 seconds to make sure there are no leaks. Depending on the original manufacturer presentation, the injectors are either painted or polished to give the best cosmetic appearance possible. Injectors are then assembled with new replaceable components (filter baskets, pintle caps, O-rings and seals) and a final test is performed with all new components on injectors. The purpose of this test is to make sure the filter basket; o-rings, seals and pintle caps are positioned correctly and are not disturbing the flow or the spray pattern of the injector. Injectors are lubricated with special oil and protective caps are placed on both ends to extend the shelf life and assure that when they are installed in the vehicle they will be in optimum operating condition. Each injector is individually bagged.

Beck Arnley 155-0200 Remanufactured Fuel Injector

Beck Arnley 155-0200 Remanufactured Fuel Injector Review

Fuel Injector

AUS Injection MP-10898 Remanufactured Fuel Injector - Ford

AUS Injection MP-10898 Remanufactured Fuel Injector - Ford Review

AUS Injection MP-10898 Remanufactured Fuel Injector - Ford Feature

• Remanufactured In the USA
• All units are 100% factory tested before packaging
• Clean injectors provide better gas milage and increase overall performance
• All injectors are lubricated prior to packaging ensuring a trouble free installation
• All injectors are backed by a 12 month 12,000 mile warranty

Quality remanufactured fuel injectors that are electronically tested for correct electrical resistance and for coil weakness. Good units are then disassembled (micro filter, seals, pintle caps and plastic spacer are removed.) Injectors are simultaneously cleaned in ultrasonic tanks specially designed to clean fuel injectors. All units are individually back flushed to remove the broken dirt particles, these particles can not be removed thru the injection orifices therefore are driven out thru the inlet of the injector. All injectors are then mounted on the flow bench in an inverted position to allow them to reverse flow at a considerable pressure. We run a high performance injector cleaning solvent thru the injectors for 30 minutes, completing the cleaning process. This process assures all dirt particles are completely removed from the injector. Injectors are now mounted on the flow bench in the correct position to begin the testing procedures. We apply 60 PIS of pressure (more than a regular multi-port fuel injection system) and maintain the injectors with no signal to them for 30 seconds to make sure there are no leaks. Depending on the original manufacturer presentation, the injectors are either painted or polished to give the best cosmetic appearance possible. Injectors are then assembled with new replaceable components (filter baskets, pintle caps, O-rings and seals) and a final test is performed with all new components on injectors. The purpose of this test is to make sure the filter basket; o-rings, seals and pintle caps are positioned correctly and are not disturbing the flow or the spray pattern of the injector. Injectors are lubricated with special oil and protective caps are placed on both ends to extend the shelf life and assure that when they are installed in the vehicle they will be in optimum operating condition. Each injector is individually bagged.

Python Injection 648-422 Fuel Injector

Python Injection 648-422 Fuel Injector Review

Python Injection 648-422 Fuel Injector Feature

• Exact OE Replacement
• No Exchange of your Original Unit Required
• Free Technical Support at 1-800-959-3829
• Every Unit is Thoroughly Tested to Meet the Original Equipment Specifications - After it is Remanufactured
• Python Injection is the Leader in Fuel Injection Remanufacturing Technology

This Python Injection Inc. fuel injector 648-422 is the exact original equipment fuel injector that came with the vehicle from the factory. This item has been precisely remanufactured to all original specifications and is guaranteed to function exactly as the vehicle's original unit.

Beck Arnley 158-0900 Fuel Injector O-Ring Kit

Beck Arnley 158-0900 Fuel Injector O-Ring Kit Review

Beck Arnley 158-0900 Fuel Injector O-Ring Kit

ACDelco 217-301 Fuel Injector Kit

ACDelco 217-301 Fuel Injector Kit Review

ACDelco 217-301 Fuel Injector Kit Feature

• Strict quality control for trouble-free performance
• 12-month/12,000-Mile Limited Warranty
• ACDelco is an Original Equipment (OE) supplier and has the experience engineering and manufacturing components that achieve the highest quality standards required by vehicle manufacturers

OE Service Fuel Injectors

When you are looking for a match to original equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done. Our lineup of OE Service Fuel Injectors, Control Modules, Mass Air Flow Sensors, Oxygen Sensors, Exhaust Gas Recirculation Valves, Manifold Absolute Pressure Sensors, Throttle Position Sensors, Idle Air Control Valves and Secondary Air Injection Reaction Systems will help your GM vehicle run as efficiently and cleanly as the day it rolled off the line. Trust ACDelco to help your vehicle run clean and green.

ACDelco Original Equipment Service Fuel Injectors are the ideal replacement for worn original equipment in your GM vehicle. Strict quality control for trouble-free performance. Competitive warranty coverage

Python Injection 638-407 Fuel Injector

Python Injection 638-407 Fuel Injector Review

Python Injection 638-407 Fuel Injector Feature

• Exact OE Replacement
• No Exchange of your Original Unit Required
• Free Technical Support at 1-800-959-3402
• Every Unit is Thoroughly Tested to Meet the Original Equipment Specifications - After it is Remanufactured
• Python Injection is the Leader in Fuel Injection Remanufacturing Technology

This Python Injection Inc. fuel injector 638-407 is the exact original equipment fuel injector that came with the vehicle from the factory. This item has been precisely remanufactured to all original specifications and is guaranteed to function exactly as the vehicle's original unit.

Python Injection 630-251 Fuel Injector

Python Injection 630-251 Fuel Injector Review

Python Injection 630-251 Fuel Injector Feature

• Exact OE Replacement
• No Exchange of your Original Unit Required
• Free Technical Support at 1-800-959-3290
• Every Unit is Thoroughly Tested to Meet the Original Equipment Specifications - After it is Remanufactured
• Python Injection is the Leader in Fuel Injection Remanufacturing Technology

This Python Injection Inc. fuel injector 630-251 is the exact original equipment fuel injector that came with the vehicle from the factory. This item has been precisely remanufactured to all original specifications and is guaranteed to function exactly as the vehicle's original unit.