AUS Injection MP-23065 Remanufactured Fuel Injector - 1991-1995 Volvo 940 With 2.3L Engine

AUS Injection MP-23065 Remanufactured Fuel Injector - 1991-1995 Volvo 940 With 2.3L Engine Review

AUS Injection MP-23065 Remanufactured Fuel Injector - 1991-1995 Volvo 940 With 2.3L Engine Feature

• Remanufactured In the USA
• All units are 100% factory tested before packaging
• Clean injectors provide better gas milage and increase overall performance
• All injectors are lubricated prior to packaging ensuring a trouble free installation
• All injectors are backed by a 12 month 12,000 mile warranty

Fuel Injector

AUS Injection MP-10373 Remanufactured Fuel Injector - 1991 Porsche With 3.0L M44 Engine

AUS Injection MP-10373 Remanufactured Fuel Injector - 1991 Porsche With 3.0L M44 Engine Review

AUS Injection MP-10373 Remanufactured Fuel Injector - 1991 Porsche With 3.0L M44 Engine Feature

• Remanufactured In the USA
• All units are 100% factory tested before packaging
• Clean injectors provide better gas milage and increase overall performance
• All injectors are lubricated prior to packaging ensuring a trouble free installation
• All injectors are backed by a 12 month 12,000 mile warranty

Quality remanufactured fuel injectors that are electronically tested for correct electrical resistance and for coil weakness. Good units are then disassembled (micro filter, seals, pintle caps and plastic spacer are removed.) Injectors are simultaneously cleaned in ultrasonic tanks specially designed to clean fuel injectors. All units are individually back flushed to remove the broken dirt particles, these particles can not be removed thru the injection orifices therefore are driven out thru the inlet of the injector. All injectors are then mounted on the flow bench in an inverted position to allow them to reverse flow at a considerable pressure. We run a high performance injector cleaning solvent thru the injectors for 30 minutes, completing the cleaning process. This process assures all dirt particles are completely removed from the injector. Injectors are now mounted on the flow bench in the correct position to begin the testing procedures. We apply 60 PIS of pressure (more than a regular multi-port fuel injection system) and maintain the injectors with no signal to them for 30 seconds to make sure there are no leaks. Depending on the original manufacturer presentation, the injectors are either painted or polished to give the best cosmetic appearance possible. Injectors are then assembled with new replaceable components (filter baskets, pintle caps, O-rings and seals) and a final test is performed with all new components on injectors. The purpose of this test is to make sure the filter basket; o-rings, seals and pintle caps are positioned correctly and are not disturbing the flow or the spray pattern of the injector. Injectors are lubricated with special oil and protective caps are placed on both ends to extend the shelf life and assure that when they are installed in the vehicle they will be in optimum operating condition. Each injector is individually bagged.

AUS Injection MP-41074 Remanufactured Fuel Injector - 1995-1999 Hyundai With 1.5L Engine

AUS Injection MP-41074 Remanufactured Fuel Injector - 1995-1999 Hyundai With 1.5L Engine Review

AUS Injection MP-41074 Remanufactured Fuel Injector - 1995-1999 Hyundai With 1.5L Engine Feature

• Remanufactured In the USA
• All units are 100% factory tested before packaging
• Clean injectors provide better gas milage and increase overall performance
• All injectors are lubricated prior to packaging ensuring a trouble free installation
• All injectors are backed by a 12 month 12,000 mile warranty

Quality remanufactured fuel injectors that are electronically tested for correct electrical resistance and for coil weakness. Good units are then disassembled (micro filter, seals, pintle caps and plastic spacer are removed.) Injectors are simultaneously cleaned in ultrasonic tanks specially designed to clean fuel injectors. All units are individually back flushed to remove the broken dirt particles, these particles can not be removed thru the injection orifices therefore are driven out thru the inlet of the injector. All injectors are then mounted on the flow bench in an inverted position to allow them to reverse flow at a considerable pressure. We run a high performance injector cleaning solvent thru the injectors for 30 minutes, completing the cleaning process. This process assures all dirt particles are completely removed from the injector. Injectors are now mounted on the flow bench in the correct position to begin the testing procedures. We apply 60 PIS of pressure (more than a regular multi-port fuel injection system) and maintain the injectors with no signal to them for 30 seconds to make sure there are no leaks. Depending on the original manufacturer presentation, the injectors are either painted or polished to give the best cosmetic appearance possible. Injectors are then assembled with new replaceable components (filter baskets, pintle caps, O-rings and seals) and a final test is performed with all new components on injectors. The purpose of this test is to make sure the filter basket; o-rings, seals and pintle caps are positioned correctly and are not disturbing the flow or the spray pattern of the injector. Injectors are lubricated with special oil and protective caps are placed on both ends to extend the shelf life and assure that when they are installed in the vehicle they will be in optimum operating condition. Each injector is individually bagged.

ACCEL 150124 Performance Fuel Injector

ACCEL 150124 Performance Fuel Injector Review

ACCEL 150124 Performance Fuel Injector Feature

• Excellent atomization of fuel
• Improved fuel economy
• Improved throttle response
• Improved burn efficiency
• High design impedance

Accel Performance Fuel Injector provides precise control of fuel delivery and atomization for increased power. It features high design impedance and utilizes a precision-ground pintle design to produce ultra-fine fuel atomization. This injector offers improved throttle response and enhanced fuel economy. This fuel injector facilitates easy installation with precision-molded O-rings and fine-mesh fuel strainers.

Actron CP7838 Professional Fuel Pressure Tester

Actron CP7838 Professional Fuel Pressure Tester Review

Actron CP7838 Professional Fuel Pressure Tester Feature

• Measures the available fuel pressure with engine running on or off
• Features 6-ft hose to aid reaching any test point
• Handy pouch for storing gauge and adapters
• Features adaptors to fit most domestic and import applications

This fuel pressure tester diagnoses drivability problems caused by poor fuel pressure. It features a relief button and 6-ft hose to safely dispose of gasoline without disconnecting the gauge. It also works on the throttle body injection with a threaded connection at fuel filter or throttle body.

Delphi FJ10247 Fuel Injector

Delphi FJ10247 Fuel Injector Review

Delphi FJ10247 Fuel Injector Feature

• Accurate, tightly controlled fuel spray pattern for more efficient fuel vaporization, reducing unburned hydrocarbon emissions
• Internal seal rings protected from fuel exposure, minimizing in-use "sticking" for longer-lasting durability
• Improved sealing materials, providing cold sealing to -40 degrees celsius for better cold starts
• Design configuration flexibility
• Specifically developed to be compatible with electronic unit pump (EUP) systems operating at high injection pressures

Delphi's replacement fuel injectors deliver identical OE fit and more precise spray pattern than the competition for maximum engine performance. Delphi injectors are proven to operate better, repond faster, and last longer.

AUS Injection MP-10196 Remanufactured Fuel Injector

AUS Injection MP-10196 Remanufactured Fuel Injector Review

AUS Injection MP-10196 Remanufactured Fuel Injector Feature

• Remanufactured In the USA
• All units are 100% factory tested before packaging
• Clean injectors provide better gas milage and increase overall performance
• All injectors are lubricated prior to packaging ensuring a trouble free installation
• All injectors are backed by a 12 month 12,000 mile warranty

Quality remanufactured fuel injectors that are electronically tested for correct electrical resistance and for coil weakness. Good units are then disassembled (micro filter, seals, pintle caps and plastic spacer are removed.) Injectors are simultaneously cleaned in ultrasonic tanks specially designed to clean fuel injectors. All units are individually back flushed to remove the broken dirt particles, these particles can not be removed thru the injection orifices therefore are driven out thru the inlet of the injector. All injectors are then mounted on the flow bench in an inverted position to allow them to reverse flow at a considerable pressure. We run a high performance injector cleaning solvent thru the injectors for 30 minutes, completing the cleaning process. This process assures all dirt particles are completely removed from the injector. Injectors are now mounted on the flow bench in the correct position to begin the testing procedures. We apply 60 PIS of pressure (more than a regular multi-port fuel injection system) and maintain the injectors with no signal to them for 30 seconds to make sure there are no leaks. Depending on the original manufacturer presentation, the injectors are either painted or polished to give the best cosmetic appearance possible. Injectors are then assembled with new replaceable components (filter baskets, pintle caps, O-rings and seals) and a final test is performed with all new components on injectors. The purpose of this test is to make sure the filter basket; o-rings, seals and pintle caps are positioned correctly and are not disturbing the flow or the spray pattern of the injector. Injectors are lubricated with special oil and protective caps are placed on both ends to extend the shelf life and assure that when they are installed in the vehicle they will be in optimum operating condition. Each injector is individually bagged.

Python Injection 648-273 Fuel Injector

Python Injection 648-273 Fuel Injector Review

Python Injection 648-273 Fuel Injector Feature

• Exact OE Replacement
• No Exchange of your Original Unit Required
• Free Technical Support at 1-800-959-3797
• Every Unit is Thoroughly Tested to Meet the Original Equipment Specifications - After it is Remanufactured
• Python Injection is the Leader in Fuel Injection Remanufacturing Technology

This Python Injection Inc. fuel injector 648-273 is the exact original equipment fuel injector that came with the vehicle from the factory. This item has been precisely remanufactured to all original specifications and is guaranteed to function exactly as the vehicle's original unit.

AUS Injection CP50103-6 Remanufactured Central Port Fuel Injector Assembly

AUS Injection CP50103-6 Remanufactured Central Port Fuel Injector Assembly Review

AUS Injection CP50103-6 Remanufactured Central Port Fuel Injector Assembly Feature

• Remanufactured In the USA
• All units are 100% factory tested before packaging
• Clean injectors provide better gas milage and increase overall performance
• All injectors are lubricated prior to packaging ensuring a trouble free installation
• All injectors are backed by a 12 month 12,000 mile warranty

GM Light Truck and Van Remanufactured Central Port Fuel Injector Assembly 4.3 Liter V-6 1996-2002

ACDelco 217-1626 Fuel Injector

ACDelco 217-1626 Fuel Injector Review

ACDelco 217-1626 Fuel Injector Feature

• Strict quality control for trouble-free performance
• 12-month/12,000-Mile Limited Warranty
• ACDelco is an Original Equipment (OE) supplier and has the experience engineering and manufacturing components that achieve the highest quality standards required by vehicle manufacturers

OE Service Fuel Injectors

When you are looking for a match to original equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done. Our lineup of OE Service Fuel Injectors, Control Modules, Mass Air Flow Sensors, Oxygen Sensors, Exhaust Gas Recirculation Valves, Manifold Absolute Pressure Sensors, Throttle Position Sensors, Idle Air Control Valves and Secondary Air Injection Reaction Systems will help your GM vehicle run as efficiently and cleanly as the day it rolled off the line. Trust ACDelco to help your vehicle run clean and green.

ACDelco Original Equipment Service Fuel Injectors are the ideal replacement for worn original equipment in your GM vehicle. Strict quality control for trouble-free performance. Competitive warranty coverage

VENOM HP-660-6, High Flow, Maximum Performance, 60 LB/HR Flow Rate, Fuel Injector Set of 6

VENOM HP-660-6, High Flow, Maximum Performance, 60 LB/HR Flow Rate, Fuel Injector Set of 6 Review

VENOM HP-660-6, High Flow, Maximum Performance, 60 LB/HR Flow Rate, Fuel Injector Set of 6 Feature

• Precision balanced set of 6, 60 LB/HR performance injectors
• Designed to support up to 770 Horsepower
• Universal fit for grommet style, multi-port applications
• High impedance (Ohm) coil
• Used by top, professional race teams, not for street use

VENOM Performance Fuel Injectors are 100% flow tested, balanced and matched to within +/- 1.5% of their nominal flow rate. These injectors are sold in matched sets. The Fuel Injector Pintle Assemblies are matched and blueprinted to increase flow rate and fuel atomization. All internal O-rings are manufactured of an advanced polyelastamer compound which increases their resistance to fuel chemicals and also, resists damage caused by the higher temperatures performance engines create. The Electromagnetic Coils injector coils are molded of aerospace grade materials and wound with micro-meter tolerances to decrease activation time at the start of each duty cycle. The coils are encased in Kapton tape and molded to protect against electrical current leaching when under severe load. In manufacturing the Electrical Plug VENOM uses solid copper terminals to increase current flow to the coils. Also the terminals and guide pins are slightly oversized to ensure a tighter fit and lesson the chance of corrosion damage, while maintaining a solid electrical connection. The Filter Basket is a fine mesh filter designed to protect the injector internals from contaminant damage. The filter is also manufactured from a fuel/oil resistant polyelastamer. The External Injector Seals are included for each injector and are also designed to withstand the pressures and heat generated by performance applications.

Standard Motor Products FJ503 Fuel Injector

Standard Motor Products FJ503 Fuel Injector Review

Standard Motor Products FJ503 Fuel Injector Feature

• Standard Motor Products are designed and manufactured to equal or exceed OE parts in every publishedor testable specification.
• Control Modules are covered for 5 years or 50,000 miles. All other products are covered by a 90 day or 3000 mile warranty.

Standard Fuel Injector - MFI

Delphi FJ10093 Fuel Injector

Delphi FJ10093 Fuel Injector Review

Delphi FJ10093 Fuel Injector Feature

• Accurate, tightly controlled fuel spray pattern for more efficient fuel vaporization, reducing unburned hydrocarbon emissions
• Internal seal rings protected from fuel exposure, minimizing in-use "sticking" for longer-lasting durability
• Improved sealing materials, providing cold sealing to -40 degrees C for better cold starts
• Mulitifuel capability

Delphi is an original equipment brand that partners with other manufacturers to supply the parts your car was originally built with. This product is in a Delphi package, note that the part may have been manufactured by an independent Delphi supplier.